How to Keep Your Pool Crystal Clear Year-Round in Florida

Florida pools don't get a day off. There's no cover-it-up-and-forget-it winter like up north. Whether you're in Bradenton, Sarasota, or Lakewood Ranch, your pool is exposed to sun, rain, wind, pollen, and organic debris 365 days a year. The good news? With a simple seasonal routine, keeping your water crystal clear isn't complicated — it's just consistent.

Here's the maintenance calendar we give every client after their pool is built. It's the same schedule our service techs follow.

How Do You Maintain a Pool in Spring in Florida?

Spring is when things wake up. Water temperatures climb from the mid-70s into the 80s, and algae starts growing faster than you'd expect. This is the season to get ahead of problems before summer hits.

What to Focus On

• Increase chlorine monitoring. As water temps rise above 80°F, chlorine burns off faster and algae becomes more aggressive. Test free chlorine at least twice a week. Target 2–4 ppm.
• Inspect all equipment after winter. Check pump seals, o-rings, filter pressure gauge, and all plumbing connections. Even a mild Florida winter can cause rubber parts to dry out and crack.
• Increase pump run time to 8–10 hours per day. Your pool needs to turn over its full water volume at least once a day. As temps rise, so does your pump schedule.
• Brush walls and tile weekly. Algae spores attach to surfaces before they bloom in the water. A good weekly brushing prevents buildup, especially on shaded walls and steps.
• Run a phosphate test. Phosphates are algae food. Pollen, fertilizer runoff, and organic debris all introduce phosphates. If levels are above 300 ppb, treat with a phosphate remover.
• Clean or backwash your filter. A clean filter at the start of the busy season means better water clarity all summer.

"Spring is when most pool problems start — not because anything broke, but because owners didn't adjust their routine when temps changed."

What Pool Maintenance Does Summer Require in Florida?

Peak season. Peak heat. Peak demand on your pool and its equipment. This is when your pool works the hardest and when neglect shows up the fastest. Algae can bloom in 24–48 hours if chlorine drops below 1 ppm in 90°F water. Proper water chemistry is essential during these months.

What to Focus On

• Run the pump 10–12 hours per day. Water temps in the high 80s to low 90s mean you need maximum circulation. Run it during daylight hours for best results.
• Test water chemistry 2–3 times per week. At minimum, check free chlorine, pH, and alkalinity. Summer heat and heavy use throw chemistry off quickly.
• Retest after every big storm. Florida's afternoon thunderstorms dump fresh rainwater into your pool, which dilutes chemicals and drops pH. A single heavy storm can swing pH by a full point. Always retest and adjust after significant rain.
• Shock weekly. A weekly oxidizer shock (cal-hypo or non-chlorine shock) breaks down chloramines and organic waste that regular chlorine can't handle. Do it at dusk so the sun doesn't burn it off immediately.
• Clean skimmer baskets daily. Bugs, leaves, and debris accumulate fast in summer. A clogged skimmer starves your pump and reduces circulation.
• Watch for early algae signs. Slippery walls, hazy water, or a sudden spike in chlorine demand are all warning signs. Catch it early and you can brush and shock. Miss it by a day and you're looking at a full algae treatment.
• Check water level. Evaporation accelerates in summer heat. Keep water at the middle of the skimmer opening for proper flow.

Summer Chemistry Targets

How Should You Care for Your Pool in Fall?

Fall in Florida is the transition season. Temps start dropping (slowly), storms taper off, and the trees finally start shedding. It's also the tail end of hurricane season, which means you should have a storm prep plan in place.

What to Focus On

• Reduce pump run time to 6–8 hours per day. As water temps drop below 80°F, your chlorine demand decreases and you don't need as much circulation.
• Skim daily during leaf season. Oak leaves, pine needles, and palm fronds hit hard in fall. Organic debris on the bottom stains finishes and feeds algae. Don't let it sit.
• Hurricane season overlap. September and October are statistically the most active months. If a storm is coming, lower water level by 1–2 feet, remove loose pool furniture, turn off all equipment at the breaker, and do NOT drain the pool — it needs the weight to resist groundwater pressure.
• Schedule equipment maintenance. Fall is the best time to service your pump, replace worn o-rings, clean or replace filter cartridges, and inspect your heater before you need it. Less demand means more scheduling flexibility.
• Check your screen enclosure. Inspect for tears, loose spline, and corrosion — especially after storm season. Small repairs now prevent bigger problems later.
• Balance CYA levels. After a full summer of stabilized chlorine use, cyanuric acid can creep above 70 ppm. High CYA reduces chlorine effectiveness. The only fix is partial drain and refill.

Do Florida Pools Need Winter Maintenance?

Yes, you still maintain your pool in Florida. It doesn't freeze (usually), but water temperatures drop to the 55–70°F range and your pool's needs change. The good news: winter is the lowest-maintenance season by far.

What to Focus On

• Reduce pump run time to 4–6 hours per day. Cold water holds chlorine longer and algae growth slows dramatically. You don't need nearly as much circulation.
• Chemical demand is at its lowest. Whether you run a salt system or traditional chlorine, you'll use less of everything. Test weekly instead of multiple times a week. Keep free chlorine at 1–3 ppm.
• Good time for resurfacing or acid wash. If your pool interior is stained or showing its age, winter is ideal for an acid wash or replaster. Lower temps mean less chemical volatility during the process, and you'll have the pool back before spring.
• Heater maintenance. If you have a gas or heat pump heater, now's when you're using it. Check for proper ignition, clean burner trays (gas), and make sure airflow isn't restricted (heat pump). A dirty heater runs inefficiently and can fail when you need it most.
• Watch for freeze warnings. It's rare in SW Florida, but it happens. If temps drop below 35°F, run your pump continuously to prevent pipe freezing. Moving water doesn't freeze easily.
• Clean the deck and cage. Winter is a good time to pressure wash your pool deck and screen enclosure. Less heat means less regrowth of mold and mildew after cleaning.

"The biggest winter mistake we see? People stop checking their pool entirely. Then March rolls around and they've got a green swamp."

What Is the Weekly and Monthly Pool Maintenance Checklist?

Every Week

• Test free chlorine and pH (more often in summer)
• Empty skimmer and pump baskets
• Skim surface debris
• Brush walls, steps, and waterline
• Vacuum or run robotic cleaner
• Check water level
• Inspect equipment for leaks or unusual noises

Every Month

• Test total alkalinity, calcium hardness, CYA, and phosphates
• Clean or backwash filter
• Inspect o-rings and lubricate with silicone-based lube
• Check salt cell for calcium buildup (if salt system)
• Inspect screen enclosure for damage
• Clean waterline tile

Is DIY Pool Maintenance Worth It vs. Hiring a Pro?

You can absolutely maintain your own pool. We teach every client how during our post-build pool school. But a lot of homeowners in Manatee and Sarasota County decide their time is better spent in the pool than working on it.

What Professional Service Costs

Weekly pool service in SW Florida typically runs $150–$300 per month depending on pool size, whether you have a spa, and the level of service. Here's what's usually included:

• Weekly water testing and chemical balancing
• Skimming, brushing, and vacuuming
• Emptying baskets and cleaning the waterline
• Filter cleaning (monthly or as needed)
• Equipment inspection and minor adjustments
• Chemical supply (some companies include it, others don't — ask)

On the DIY side, expect to spend $50–$100/month on chemicals plus your time. A basic test kit runs about $30, and a good robotic cleaner ($500–$1,200) pays for itself within a year compared to a weekly service.

When to Call a Pro Regardless

• Green pool or full algae bloom
• Equipment failure (pump, heater, salt cell)
• Persistent chemistry issues you can't resolve
• Staining or scaling on the pool surface
• Leak detection

Bottom Line

Pool maintenance in Florida is a year-round commitment, but it's not complicated. Adjust your routine with the seasons, stay consistent with testing, and don't ignore problems hoping they'll go away. A 15-minute weekly check prevents the vast majority of issues we get called out to fix.

If you're building a new pool or just want a professional set of eyes on your current setup, we're happy to help. Every pool we build comes with a full maintenance walkthrough — and we'll set you up with a schedule that fits your specific pool and lifestyle.

Frequently Asked Questions

How often should I test my pool water in Florida?

During summer, test free chlorine and pH two to three times per week. In winter, once a week is usually sufficient. Test alkalinity, calcium hardness, and CYA monthly year-round.

Can I close my pool for winter in Florida?

No. Florida pools stay open year-round because water temperatures rarely drop low enough to justify closing. You still need to run your pump, test water, and maintain chemical balance even in December through February.

How many hours a day should I run my pool pump?

It depends on the season. Run your pump 10 to 12 hours per day in summer, 6 to 8 hours in spring and fall, and 4 to 6 hours in winter. The goal is to turn over your full water volume at least once daily.

What is the most common pool maintenance mistake in Florida?

Not adjusting your routine when seasons change. Homeowners who use the same pump schedule and chemical amounts year-round end up fighting algae in summer and wasting chemicals in winter.

Maintenance recommendations are general guidelines for residential pools in Southwest Florida. Your specific pool may have different requirements based on equipment, finish type, and usage. Consult your pool builder or service professional for a customized plan.